Multia Family of MultiClient Desktops

Digital's Multia Family of MultiClient desktops enables users to run PC, UNIX
and legacy applications simultaneously, over industry standard network
protocols. The combination of Alpha AXP technology, Microsoft Windows NT
Workstation software, an optimized X11.R6 Server, and best in class terminal
emulators, results in end user application access without compromise. System
administrators can easily manage the Multia environment with integrated
configuration management software.

Multia PCI-based hardware includes a 166 MHz Alpha AXP processor with a
custom graphics accelerator for fast display performance. PCI and PCMCIA
slots support expansion for many options, such as multimedia. Pre-installed
is Multia Base Software which includes Windows NT Workstation 3.5 enabling
users to downline load MS-Windows and Windows NT applications from networked
servers. Access to applications and files is supported via industry standard
protocols such as IPX/SPX, LAN Manager, TCP/IP, DECnet, and NetBEUI/NetBIOS
protocols.  The embedded terminal emulator supports VT340 graphics, VT420
text and Tektronix 4010/4014 emulations.

Multia Base software includes a powerful Configuration Manager that enables
the system administrator to centrally customize and manage the Multia end
user environment. For example, system administrators can create workgroups of
Multia users who have common application requirements and skill sets. The
list of available applications, their location on the network, the transport
used to access them and their start-up procedures, are all predefined by the
system administrator. End users simply point and click on an icon to initiate
an application.  Any Multia hardware feature or software option can be
remotely configured by the system administrator.  Or, features can be left 
unlocked so that users can define their own customizations.

The Multia X Server option supports X11.R6 and has been optimized for Multia's
custom graphic processor. The resulting performance is equivalent to best in
class X terminals - far exceeding standard PC X server software. This option
will be available for any Multia user and will include standard X extensions
and features such as font server, NFS, and local OSF/Motif Window Manager.

Multia MultiClient Desktop is the next-generation client for users who are
serious about client/server computing.

- Embedded software provides simultaneous access to Windows NT, Windows, UNIX,
  Open VMS and legacy applications.

- Centralized Configuration Management removes end user system administration
  and can be used to optimize client/server and workgroup environments.

- Includes industry standard network protocols.

- Low cost Windows NT, Alpha AXP MultiClient Desktop.

- Easy to use, Windows style user interface with point and click access to
  networked applications.

- Optimized X11.R6 Server option provides high performance UNIX
  interoperability.

- Internet ready with 32-bit Mosaic.

                              Multia Specifications

HARDWARE

System Box
- 166 MHz Alpha AXP CPU. High performance PCI based graphics accelerator
- 340 MB hard disk
- Two PCMCIA slots (Type 1 or 2 cards supported)
- Autosensing PCI based ethernet connections for Thickwire, Thinwire, and
  Twisted Pair (10BaseT)
- Kensington lock ready
- CD audio quality input/output with built in speaker
- PCI slot option supports short card format
- SCSI-2 connector option
- Floppy drive option

Physical Characteristics
- Height 7.1 cm (2.8 in.)
- Width 31.7 cm (12.5 in.)
- Depth 31.7 cm (12.5 in)
- Weight 13.5 lb (6.1 kg) maximum

Memory
- 24MB standard memory (70 nanosecond 72 PIN industry standard SIMM memory),
  expandable to 256 MB ECC memory supports error detection and correction.

Communications
- Two serial lines, one with full modem support
- Bi-directional parallel port.

Keyboards
- LK411 (108 keys, Digital layout)
- PCXAL (101/102 keys, PC Layout)
- UNIX keyboard

Monitor Support
- Supports multisync monitors with 640 x 480, 1152 x 900, 1024 x 786 and
  1280 x 1024 resolutions @ 60 to 75 Hz refresh rate, VGA

Regulatory Compliance
- EMI: PCC Class B: CE EN00555, EN55022, EN55082, Class B: CISPR 22 Class B:
  VCCI Class 2, CSA 108.8
- Ergonomics: ZHI/618: EN29241-3 Telecom approvals from Germany, Japan, Sweden,
  and Australia.
- Nordic Country approvals: NEMKO; DEMKO; SEMKO; FIMCO.
- Safety CSA 22.2 #950; IEC950; UL1950; UL544; EN60950 plus amendments:
  VDE805 plus amendments.
- Australia/New Zealand: AS/NZD 3260

Power Supply/ Electrical Power Cord
- 100-120V or auto range
- 100-240V with detachable power cord
- 88-264V single phase, three-wire design
- 47-63 Hz frequency

SOFTWARE

Multia Base Software
(factory installed)
Microsoft Windows NT Workstation 3.5 operating system
Protocols:
- IPX/SPX
- TCP/IP
- LAN Manager
- NetBEUI/ NetBIOS
- DECnet
- LAT
- PATHWORKS client ready
User-Selectable set up in English, French, German, and Spanish

Configuration Manager
Remote workgroup and individual Multia management. Central customization of:
- Network settings
- Local and remote application access
- Hardware options (enable/disable)
Supports LAN and WAN environments
Password protection
Backup and restore configuration data
Status displays network counters, PING and current application status.

Reference Desk
- User and system administrator information and tutorials
- On-line Help and Problem Solving
- Getting Started

Application Manager
- Lists available user applications
- Customizable layout lets you add, modify, delete applications

Local Terminal Emulator
- Full VT340 graphics, VT420 text, and Tektronics 4010/4014 terminal emulation

Multia System Administrator's Kit
(one per LAN required)
CD-ROM Media
Multia Software for System Administrator's includes:
- Multia Base Software
- Backup host kits
- On-line System Administrator's Tutorial
- Hardcopy System Administrator's Guide

Multia X Server Option
Performance optimized X11R6
Local OSF/Motif Window Manager
X IMage Extension
NFS client
Enhanced TCP/IP provides dynamic routing capability
Font Support
- Font Server: SNT.BDT.PCT. font failover
XDM host chooser
Integrated with Multia Configuration Manager

Multia Serial X Protocol Option
- Supports X connections over serial line